Benefits of mold flow analysis

8

year

Yuyao City Yunpeng Plastic Mould Co.,ltd

Search This Supplers Products:Injection Mold Designplastic injection moldMolding ServiceCustom Moldcase molddie casting mold

home categories store home faqsMold Wiki

A good mold flow analysis has lots of benefits, although it is time consuming, the cost is much lower than the cost of trials during nights and days on a production injection molding machine. The difficulty is not to produce colored pictures but to explain to the customers the different results, some customers have enough knowledge to understand some others no.

In 90% of cases, I work before the injection mold is cut, so I am ready to take the responsibility of cycle time, warpage, sink marks and so others issues. I am specialized in gas assisted injection molding and I assist Chinese companies to produce plastic parts for the German automotive industry which generally use overflow. With short shot process, we can obtain a production costs reduction of 20% by simulation and 30% in practice.

Moldflow is very important tool for verifying mold design and product design, I can say it is 99.9% helpful, mold flow analysis has lots of advantages and will save a lot of money.

Mold flow analysis can provide you following benefits:

Moldflow Filling Analysis

Optimize gating
Optimize runner system
Predict fill pattern
Predict injection pressure
Determine clamp tonnage
Predict temperatures
Visualize shear rate
Visualize shear stress
Determine fiber orientation
Predict volumetric shrinkage
Predict sink
Determine venting
Avoid air traps
Locate weld (knit) lines
Develop optimum ram-speed profile

Moldflow Cooling Analysis

Find hot spots
Calculate time to freeze
Visualize uneven cooling across core and cavity
Determine uneven cooling between core and cavity
Define required coolant flow rates
Measure pressure drop in cooling system
Determine (and reduce) cycle time
Optimize the cooling layout

Moldflow Packing Analysis

Calculate proper packing pressure
Define optimum packing profile

Moldflow Warpage Analysis

Predict warpage
Find cause of warpage
Determine warpage due to orientation
Predict warpage due to differential cooling
Understand warpage due to differential shrinkage

Moldflow Gas-Assist Analysis

Determine optimized gas channel layout
Predict gas penetration
See gas permeation
Predict skin/core ratio Establish required gas pressure
Define optimized gas pressure profile
Refine spillover design

Moldflow Co-Injection Analysis

Compute skin/core ratio
Calculate skin/core distribution
Establish switch over points for skin/core (A-B)
Establish switch over points skin/core/skin (A-B-A)

We see benefits of using mold flow analysis technology in companies that correctly understand the power of the different simulation tools, and when and by whom these tools can be used. During the product design, many decisions are made that affect cost and quality, and unfortunately many decisions are made in a knowledge vacuum by a product designer. Once he/she is done many of the costs are locked in. Moldflow introduced Autodesk Simulation DFM, to help a designer develop a viable plastic part (this is as much as you can expect from a designer). Feedback on manufacturability is provided in real time. It uses minimal input from the designer, and can help avoid basic and obvious mistakes before they become expensive.

After the designer is done, someone has to figure out how to make the plastic part. This requires expertise and a different set of tools like Moldflow Adviser or Insight. This requires a different user, more precise input and results accuracy. These tools should ideally be used throughout the product development, rather than at one single stage in the process. A designer does not have the background of plastics expert, and analyst should not have to chase down basic design errors.